Technological description of the line:

 

Crushed stone of a large fraction is loaded with a front loader  inBaccumulative hopper with built-in belt conveyor PBI-10, then the crushed stone entersHammer crusher DMB-10.

After the crusher, the material of a given fraction enters theRoar GV-10  for sieving and separating it to the required fraction.

After screening, the materialconveyor 500*12000gets intoAutomatic dosing unit ADM-1000(bunker No. 1,2).

Also into the dosing unit usingauger 170x6000cement is poured (bunker No. 3) withsilo STs-50.

 

In automaticdosing unit ADM-1000three bunkers have been installed, which allow automatic dosing of the necessary recipes for production. The dosage of the material can be either two materials or three,

separately by each bunker independently from each other. 

 

- After the dosing complex, a weighed portion of limestone and cementconveyor 500*6000served

inMortar mixing complex PSK-500. 

Also, water is dosed automatically after determining the humidity by the moisture meter system with a microwave sensor with a ceramic coating.

The mortar mixing complex is equipped with automaticpigment dispensers (2 pcs.), which have storage bins withpigment supply screws in 120x 3000.

 

Mortar-mixing complex based on high-speed mixer PSK-500

developed by our company in 2018 and has no analogues in terms of its cost and capabilities!

RSK-500 stacks with:

- Mortar mixer with double high-speed mixing of our design;

- Built-in activator of our development (allows to reduce cement consumption and dramatically increase profitability);

- automatic water dispenser with determination of the required moisture content of the material using a microwave sensor with ceramic   coating and control systems;

- soft start system of the main gearbox for long-term operation and minimal wear of the gearbox;

- Armor made of wear-resistant steel is installed on the walls, bottom, and blades of the mortar mixer.

- Pneumatic gate for unloading of material;

 

- The finished mixture from the mortar mixing complex enters theconveyor 500x10000to the bunkerHyperpressa PAK-400.

 

Giperpress PAK-400

- pressing force up to 400 tons.

  Performance:

 - 700 pcs/h BRICK (depending on the type of manufactured product);

- 700 pcs/h  paving stones

- produces bricks in automatic mode using double counter pressing technology.

- Дозировка материала в Гиперпрессе происходит автоматически в постоянном режиме следя за качеством готового изделия (точный      _cc781905-5cde-3194-bb3b -136bad5cf58d_    size and maximum density).

- The new system of replacement of inserts allows less than for 30 min. change inserts or matrix

  without much effort!

- Hydraulic cylinders are made entirely from German components, which allows them to be used for many years without

  the need for restoration.

- Possibility of making bricks (flat / rib), blocks (400x200), paving slabs;

- Air blowing of the finished product and the working area of the matrix;

- Laser Protection of the working area of the press;

- System of marble coloring of a product;

 

-Afterhyperpress PAK-400finished products are stacked

Manipulator stacker UMK-100on technological pallets.

 

- Pallets with products are sent to an automatedsteam chamberto achieve the required grade.

After the steaming chamber, the finished products are stored on pallets and, if necessary, part of the products is sent to the rustication shop to give the brick a “torn texture” onmachines "Woodpecker" and "Guillotine".